<ol id="bdz1j"></ol>

        <p id="bdz1j"></p>

          <cite id="bdz1j"><big id="bdz1j"></big></cite>
          <track id="bdz1j"></track>

            <track id="bdz1j"></track>

              網站首頁新聞動態產品中心公司資質關于我們合作伙伴
              首頁資源中心公司樣本  
               
              陶瓷復合襯板
              來源: 點擊數:1335次 更新時間:2020-5-20 11:30:45
               DJM 陶瓷復合鑄造耐磨襯板技術介紹

              陶瓷復合鑄造襯板(MMC-襯板),廣泛應用于球磨機、立式磨機(VRM)、自磨機/半自磨機、破碎機、溜槽、儲料倉等設備耐磨部位。高鉻陶瓷復合鑄造襯板(MMC-Cr-襯板)具有高硬度,高耐磨性高鉻復合鑄造輥套及襯板的平均磨損深度為每1000小時2-3mm(高鉻襯板每1000小時10-15mm);高耐磨性高鉻復合鑄造導向板的平均磨損深度為每1000小時小于1mm;高耐磨性高鉻復合鑄造溜槽襯板的平均磨損深度為每1000小時10mm(高鉻襯板每1000小時25-30mm)。

              馬氏體鋼基陶瓷復合鑄造襯板(MMC-M-襯板),因選用合金鋼為基材,從而使合金鋼基體具有很好的焊接性能,又可以承擔高沖擊強度。陶瓷復合的高硬度提供了最大限度的耐磨性,同時,合金鋼底座能吸收高沖擊強度,產品易于使用,適用火焰氣割,砂輪鋸,水割,等離子等多種切割方式切割及焊接加工。

              MMC liner for Ball mill, Vertical mill (VRM), AG/SAG, Crusher, Chute, storage bin.

              1, High Cr cast iron matrix ceramic composite casting liner ( MMC-Cr-Liner) ,

              the MMC-Cr liner has high hardness, high wear resistance

              The average wear depth of the high-chromium composite casting roll sleeve and liner is 2-3mm per 1000 hours (high-chromium roller and liner is 10-15mm per 1000 hours)

              The average wear depth of the high-chromium composite casting Chute liner is 10mm per 1000 hours (high-chromium Chute liner is 25-30mm per 1000 hours)

              2, Martensite steel matrix ceramic composite casting liner ( MMC-M-Liner) ,

              The MMC-M liner can be welded and machining.

              The wear-resistant  plate has very good welding performance while bearing high impact.

              Use Example of Ceramic insert liner of ZGM95 Vertical mill (max lose 23-26mm after 8700hour)

              Material= Coal HGI=60

              Feed size= 30-50mm

              The average wear depth of the high-chromium composite casting roll sleeve and liner is 2-3mm per 1000 hours (high-chromium roller and liner is 10-15mm per 1000 hours)

              【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
              上一篇:陶瓷復合風扇磨反擊板 下一篇:高錳鋼陶瓷復合齒板
               
                友情鏈接:   DJM-CASTING & FORGING  |  波紋補償器 |  bjjm-bj |  sauter-cn
              環球破碎機網淘寶動態評分SCR脫銷蓄熱式焚燒爐叉車尾氣凈化
              高鉻陶瓷復合_陶瓷復合鑄造_高錳鋼陶瓷復合 - 北京金煤創業科技股份有限公司 2016-2020 @ All Rights Reserved 京ICP備16053533號-1
              郵件:info@djm-bj.com 聯系電話:010-88909291  地址:北京市石景山區古盛路36院1號樓14層1403